web analytics
Blog

How To Change Lawn Mower Blade

If there seem to be any missing spots on the grass you trimmed over, your lawnmower is ditching you. The blade of the lawnmower requires to be changed. However, it does not need to change occasionally but after every massive use. You should perform this to make your lawnmower highly efficient. By changing the blade, you will have smooth trimming. The new blade of the lawnmower will be clean, so it will also result in sharp cutting.

How To Change Lawn Mower Blade?

Changing a lawnmower is a simple task. The process of replacing won’t consume much time if you do it precisely. The grass will cut smoother with a cleaned lawnmower blade. Worn blades might shred your lawn instead of cutting it, causing extra harm to the specific grass stems. Better cuts promote fuller, stronger grass. We are going to list down the ways and methods to change the lawnmower blade.How To Change Lawn Mower Blade

1.) Raise The Mower Deck To Uncover The Blade:

Keep in mind that you are not bending the lawnmower in such a manner that oil dribbles across the engine, the lawn, and yourself by paying particular attention to the carburetor and the oil container. The best approach to accomplish this is to turn the mower back toward the handle and hold it up with a load or with the assistance of a person. It isn’t always applicable for all lawnmowers, so use your time wisely and, if required, examine the owner’s instructions.

2.) Turn Off The Spark Plug:

If any oil or gas interacts with the spark plug, it’s advisable to be cautious and avoid a short-out or electrical flare-up. It shouldn’t be an issue if you handle the lawnmower correctly, but it’s always better to be careful.

3.) Drag The Blade Mounting Bolt:

Unscrew the mounting with a socket wrench of the correct length, keeping the blade from rotating with your different side. Take care not to misplace any screws or bolts that can be utilized to keep the blade in position.

When you’re replacing the blade, keep an eye on its location. The replacement one will be mounted in the same arrangement as the old one, with the pointed end of the blade traveling counter-clockwise as the system rotates. However, that might not be the case on all lawnmowers, so pay much attention to how this blade is attached and replace it appropriately.

4.) Buy Replacement Blades:

Numerous home renovation or hardware shops provide replacement blade sets for push lawnmowers at a low price. The set includes new pre-weighed and cleaned blades as well as replacement bolts. It’s an excellent idea to replace your blades; if they have become old.

Some lawnmowers have a top cap with two short separate fixed blades. However, some latest lawn mowers have only one extended blade that resembles a ruler. Turn the lawnmower back to check the blade, or ask a hardware shop employee about the sort of blade that will work with your mower. If you have one, look through the owner’s guide.

Furthermore, if the previous blades appear in a proper shape, you can save those and get them cleaned. If the blades are old, with shards or bits of metal missing, it’s time to replace them.

5.) Place The New Blade In The Correct Direction:

Insert the screws and bolts, or use fresh screws and nuts of the proper size, and correspond the blades as they have always been. You should own a manual. Or else, be careful not to overtighten the nuts and deform them. It can produce damage to the lawnmower.

The majority of blades have a particular or standard fitting. When installing the new blade, ensure it’s the same size as the previous one and that the distance from the lawn mower deck is equal. Thoroughly tighten the new blade onto the screws, as it will be considerably cleaner than the previous one.

When conducting the task, it’s essential to wear substantial mechanical gloves to prevent your hands. It’s also a good idea to block the blade from rotating when reinstalling it with a little bit of wood. To avoid things from spinning, insert a tiny piece of wood between both the blade and the lawnmower deck.

6.) Inspect The Blade For Play:

When you lift the blade upwards and downwards forcefully, make sure it’s attached perfectly and has no instability. Unplug any jacks or supports used to keep the lawnmower in a safe spot. Try to avoid motor disturbance. Wait for an hour or 30 minutes for the oil to flow to the motor. Before using the oil, keep in mind, it is within the recommended parameters.

7.) Reload The Gas Tank And Do A Quick Check Before Trimming:

If required, inspect the air filter for oil saturating the foam filter and reinsert the spark plug cord. After a brief examination, you must be ready to start your lawnmower and begin mowing the lawn with your latest blades. They will work much more effectively.

Safety Precautions:

  • You should make sure that the fresh blades are the same size as the existing ones before buying them.
  • You should not over-tighten the lawnmower nuts or bolts.
  • You must check the mower’s instructions to ensure everything is in working order.
  • During the installation, utilize your hand, a bush, or a small piece of wood to prevent the blades from turning.
  • Always wear safety hand gloves while experimenting to bypass any harm.

Check out the More Tools on our Website.

Conclusion:

Replacing the blade of your lawnmower may seem a bit complicated. But, it is not difficult at all. With the right equipment, you can rule the lawn! Make sure you use the pieces of equipment in the right way. Another essential is to be cautious. Follow all the instructions precisely. Also, you must prevent the fuel or oil to come in contact with your hands or skin. All the steps required for the process are mentioned in this guide. You can perform it like a master, but with a bit of practice.

Alan Murry

Alan Murray is the founder and chief editor of Toolscop.com, a leading online resource for household tools reviews and recommendations. With a passion for all things related to lawnmowers, grinders, compressors, and other essential tools for maintaining a beautiful and functional home, Alan has built a reputation as a trusted expert in the industry. As the chief editor of Toolscop.com, Alan oversees a team of dedicated writers and researchers who work tirelessly to provide readers with the latest information on the best household tools available on the market. Through his informative and engaging reviews, Alan offers readers valuable insights into the features, performance, and reliability of the tools he writes about. Alan's writing style is approachable, easy to understand, and always backed by thorough research and hands-on testing of the products he reviews. He takes pride in his work and is committed to providing his readers with accurate and honest assessments of the tools he covers. Whether you're a homeowner looking to upgrade your tool collection or a professional seeking the latest innovations in the industry, Toolscop.com offers a wealth of knowledge and expertise that can help you make informed decisions and get the most out of your household tools. With Alan's leadership and dedication to quality, Toolscop.com has become a go-to resource for anyone looking to make smart purchasing decisions for their home tools.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close
Close